Chimney Repair in Fort Myers - Inspected on Camera, Then Priced in Writing

Trusted Chimney Repair for Fort Myers Homeowners

Chimney repair in Fort Myers usually starts with something a homeowner can see but can’t explain: a stain on the ceiling near the flue, a cap that’s been bent or blown loose, mortar joints that crumble when you touch them, or a firebox that smokes into the room instead of drawing up. Those aren’t cosmetic problems. They’re the visible end of water getting in, a liner that’s given up, or masonry that’s been quietly working loose through years of heat, rain, and settling. Our technicians have up to 9 years of experience with exactly this kind of damage, and we carry the trade-grade materials to fix it on the visit rather than ordering parts and coming back. We work across Fort Myers, including older homes along McGregor and newer builds out toward Cypress Lake, and same-day scheduling is often possible. Call (844) 834-3136 to book a repair estimate.

Call (844) 834-3136

Chimney Cap Installation

Chimney Cap Installation is the fitting of a screened, weather-tight cover over the flue opening, and it’s the single cheapest way to keep rain, leaves, and animals out of a chimney in southwest Florida. You need one when the flue is open to the sky, when a mesh screen is rusted through or torn, or when you’ve had a bird or squirrel problem. We fit Gelco and Olympia Chimney caps sized to the flue, sealed to the crown rather than wedged loose, and we’ll tell you plainly if a cap won’t solve what you’re describing. Installation at Fort Myers Chimney Sweep is a small job, and it’s folded into the written estimate you approve before we start.

Stainless and Galvanized Options

Stainless caps cost more up front and hold up far better to heat and humidity than galvanized ones, which eventually chalk and rust through. For a flue that gets regular winter use, stainless is usually the better buy. We’ll show you both and let you decide; there’s no wrong answer for a chimney that sees occasional fires.

Animal and Rain Guards

A cap with the right mesh size keeps squirrels, birds, and wasps out of the flue while still letting smoke and exhaust escape. Mesh that’s too fine clogs with soot; too coarse and small animals push straight through it. We match the screen to your flue and your fuel type rather than using one size everywhere.

Chimney Cap Replacement

Chimney Cap Replacement is removing a failed, rusted, or storm-damaged cap and fitting a new one that actually seals. You need it when the old cap has rusted through at the seams, when wind has bent or lifted it, when the mesh has torn, or when a repair attempt with caulk and wire is no longer holding. A loose cap does more damage than no cap at all because it channels water straight down the flue onto the smoke shelf. Replacement at Fort Myers Chimney Sweep uses Gelco and Copperfield caps, and we dispose of the old one on the visit. Cost falls into the same small-job range as a new install and is set by the written estimate before we begin.

Why Loose Caps Fail Fast

Most failed caps on Fort Myers roofs were never fastened to the crown properly, just set in place. Wind works them loose, water gets under the edge, and the whole thing lifts. A proper replacement is anchored and sealed to masonry, not clamped to a flue tile.

Reusing Sound Hardware

Not every cap needs replacing. If the metal is sound and only the fasteners or sealant have failed, we can often re-seat the existing cap with new hardware and a fresh bead of sealant. We’ll tell you which you’re looking at before you pay for anything.

Chimney Liner Installation

Chimney Liner Installation is fitting a new flue lining inside the existing chimney to contain heat, combustion gases, and creosote. You need it when the original clay tiles are cracked, spalling, or missing joints, when the current liner isn’t rated for the appliance you’re running, or when a change of fuel calls for a different flue. We install DuraFlex flexible liner systems, which navigate offset and angled flues that rigid liners simply can’t pass, and we handle the connections with Famco components. Liner work is the largest of these repairs, and the price depends on flue height, the number of offsets, and liner diameter, so it’s always quoted from the written estimate after we’ve inspected. Nothing gets recommended without camera evidence you can see.

When Relining Is the Right Call

A cracked clay tile lets heat reach framing and lets carbon monoxide escape into the house, so a compromised liner is not something to defer. If a camera inspection shows the damage is limited to one section, we’ll say so. If the whole flue has gone, relining is the honest fix.

Why Flexible Liners Fit Better

Older Fort Myers homes often have flues that offset partway up, and rigid pipe won’t make the turn without cutting into the chimney. DuraFlex bends through those paths while keeping a continuous, sealed pipe from appliance to cap.

Chimney Flashing Repair

Chimney Flashing Repair is fixing the metal weatherproofing at the roof-to-chimney joint, the seal that keeps rain from running down the sides of the chimney and into the attic. You need it when you see staining on roof decking, rusted or gaping flashing, lifted shingle edges around the chimney, or daylight showing at the joint from inside the attic. We reset and reseal the flashing, replace deteriorated sections, and check the counter-flashing into the masonry. In Fort Myers, where heavy summer rain arrives fast, a flashing gap that sends a cup of water inside over months is a far bigger issue than the leak itself. Quote is per job from the written estimate.

Step and Counter Flashing

There are two parts to a flashing job: the step flashing woven into the roof shingles, and the counter-flashing set into a groove in the chimney. Both have to be intact. We check the groove and the masonry above it, since a crack there makes any flashing repair short-lived.

Water Stains and Rust

Rust on the flashing doesn’t always mean it’s failed; rust where it meets the shingles usually does. Brown streaks down the brick or ceiling stains after a storm are the other obvious sign. A photograph of the joint tells us most of what we need to know.

Chimney Crown Repair

Chimney Crown Repair is fixing the sloped concrete top of the chimney that sheds water away from the flue and the masonry below it. You need it when the crown is cracked, spalling, or pulling away from the flue, which lets water seep straight down through the brick. We re-cast or patch the crown with a proper slope and seal the flue-to-crown joint so water runs off instead of in. Crown damage is common in Fort Myers on masonry chimneys that have gone through many wet seasons and sun cycles. The crown work is included in the written estimate, and small cracks can often be sealed on the same visit as a sweep.

Cracked Crowns and Water Entry

A hairline crack in the crown is normal; a crack you can slide a putty knife into is not. Once water gets under the crown it works into the brick and can freeze nothing here, but it does loosen mortar and stain the interior. Crown repair is far cheaper than rebuilding the top of a chimney.

Resurfacing Over Replacement

When the crown is sound but the surface is pitted and spalling, a resurfacing coat with a proper slope can extend its life without tearing it out. We use HeatShield ceramic resurfacer where the crown and flue need it, and full replacement where the base is unsound.

Chimney Repair Companies

Chimney Repair Companies vary a lot in what they actually do. Some are generalists who sweep chimneys on the side; others are dedicated chimney specialists with trade-grade materials and camera equipment. The difference matters most when the job turns out to be more than a cleaning. At Fort Myers Chimney Sweep, repair is a core service, not an upsell. We carry DuraFlex liner systems, HeatShield ceramic flue resurfacer, Gelco caps, Famco venting, and Copperfield accessories, which means routine fixes happen on the visit instead of after a return trip. When you compare chimney repair companies in Fort Myers, ask what materials they use and whether they can show you the camera footage behind any recommendation. Our quotes come from the written estimate you approve.

What to Ask Before You Book

Ask whether the company carries its own repair materials or subcontracts the work, and whether a camera inspection and photo report are included. Ask to see a written estimate before any work starts. A company that can answer those plainly is one worth calling back.

Dedicated Chimney Work vs. Generalists

A generalist can sweep a flue and replace a cap, and that’s fine for a clean chimney. Once the conversation turns to liners, crowns, or heat-rated venting, you want someone who works with those products regularly. It’s the same call either way; the difference is what they can finish.

Chimney Masonry Repair

Chimney Masonry Repair is fixing the brickwork and mortar that make up the chimney structure, from repointing joints to rebuilding a section of stack that’s come loose. You need it when mortar is crumbling out of joints, bricks are spalling or flaking, the stack is leaning, or water has found its way in through failed masonry. We repoint, replace damaged brick, and seal the repaired masonry so it sheds water rather than soaking it up. On Fort Myers homes, the combination of intense sun and heavy rain ages mortar faster than most homeowners expect. Masonry work is quoted per job from the written estimate after we’ve inspected the stack.

Repointing vs. Rebuilding

Repointing is grinding out failed mortar and packing in new material, and it’s the right fix when the bricks themselves are sound. Rebuilding a section is needed when brick faces have blown or the stack has moved. We’ll show you which you have and why.

Spalling Brick and Efflorescence

White chalky crusting and flaking brick faces are signs moisture is moving through the masonry. Left alone, that process hollows out the wall from the inside. Sealing and repointing early keeps a small repair from turning into a rebuild.

Brands We Service

We work with DuraFlex flexible liner systems and know where they stress at the appliance collar and at the top plate, which is usually where a liner that’s been installed badly starts to fail. We install and service HeatShield ceramic flue resurfacer, and we’re practiced at judging which damaged flues can be resurfaced rather than cut out and replaced. Gelco caps and Famco venting components come through the same trade suppliers, Olympia Chimney and Copperfield, that certified chimney inspectors specify.

Having those brands in the bag means a repair that starts as a sweep can usually finish as a repair, without a second visit for parts. We service these products and know how they wear. Whether you have DuraFlex, HeatShield, Gelco, Famco, Olympia, or Copperfield, or any other make, we can help.

Signs You Need a Pro Right Now

• Smoke backing into the room. A fireplace that smokes when it’s cold outside usually has a flue or cap restriction, not a problem with the wood. The longer it draws badly, the more creosote builds up in a restricted flue.
• Water stains near the chimney. Brown rings on the ceiling or attic sheathing after heavy rain point to a failed flashing, crown, or cap. Water that’s already reached the ceiling has been working in for a while.
• Crumbling mortar or loose brick. If mortar joints crumble when you touch them or a brick rocks in place, the stack needs attention before the next storm. Loose masonry can drop pieces onto the roof or ground.
• A shiny, flaky, or heavy soot layer inside the flue. Stage three creosote looks glazed and is a real chimney fire risk, and it’s hard to remove without professional tools. Sweeping and inspection come first; repair follows if the flue’s been damaged.
• Carbon monoxide alarms or a smoky smell in the house. A compromised liner or blocked flue can let combustion gases into the living space. Stop using the fireplace and call for an inspection before the next burn.

Our Process, Step by Step

1. 1
   Book the visit. We take the details by phone and schedule a chimney repair estimate. Dispatch runs 7am to 7pm Sunday through Friday, and same-day slots are often available.
2. 2
   Inspect with a camera. We run a video camera down the flue and photograph what we find, and we go up to look at the crown, cap, and flashing. You see the footage before we recommend anything.
3. 3
   Explain the findings plainly. Every recommendation comes from something visible on that inspection, not from a package price sheet. If work can safely wait until next season, we say so.
4. 4
   Write the estimate. You get a per-job written estimate covering materials and labor, using the trade brands we carry. Nothing starts until you approve it, and the estimate sets the final price.
5. 5
   Do the work and clean up. We complete the repair on the visit where parts allow, clean the work area, and walk you through what was done. Any follow-up is scheduled before we leave.

How Much Does Chimney Repair Cost in Fort Myers?

Our Service Area Near Fort Myers

We cover Fort Myers and the surrounding communities, including Whiskey Creek, Lochmoor Waterway Estates, Villas, McGregor, Cypress Lake, Iona, Estero, Fort Myers Beach, and Bonita Springs. Travel times vary by location and traffic, and we confirm the arrival window when you book. Whether your chimney is in an older McGregor home or a newer build near Estero, the work is the same. You’ll find more on our Fort Myers service page, and you can read about Whiskey Creek and Lochmoor Waterway Estates coverage as well.

Frequently Asked Questions About Chimney Repair in Fort Myers

Schedule Your Chimney Repair Service in Fort Myers Today

A cap, a crown, or a flashing joint is a small repair until water and heat turn it into a big one. Our technicians have the trade-grade materials to finish most repairs on the visit, and every recommendation comes from camera footage you can see for yourself. Call (844) 834-3136 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Fort Myers Chimney Sweep.