Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Fort Myers?
Chimney liner installation in Fort Myers typically costs $1,450 to $3,800, and a partial chimney rebuild usually runs $1,900 to $5,200 depending on how much masonry is removed and replaced. Full chimney rebuilds that go below the roofline run higher. The written estimate sets the final price, and it’s free.
We’re Fort Myers Chimney Sweep, and liner and rebuild work is one of our three core services. That matters more than it sounds. A generalist who sweeps chimneys on the side doesn’t keep DuraFlex flexible liner systems, HeatShield ceramic flue resurfacer, Gelco caps, Famco venting components, Olympia Chimney parts, or Copperfield accessories within reach. We do. We repair, not just inspect, so a cleaning visit that turns up a cracked flue can often turn into a completed fix instead of a second appointment.
Chimney Liner & Rebuild Cost Breakdown (2026)
Below are the typical ranges we see for liner and rebuild work in the Fort Myers market. Every job is different, and none of these numbers are a quote. They’re here so you can walk into the estimate conversation knowing roughly where the figures land.
| Line item | Typical Fort Myers range |
|---|---|
| Flexible stainless liner, standard straight flue (DuraFlex) | $1,450 – $2,600 |
| Flexible liner, complex or offset flue | $2,200 – $3,800 |
| HeatShield ceramic flue resurfacing | $950 – $2,400 |
| Liner inspection and camera scan | $150 – $350 |
| Crown repair or rebuild | $450 – $1,300 |
| Partial chimney rebuild (above roofline, select courses) | $1,900 – $5,200 |
| Full chimney rebuild (below roofline, structural) | $5,500 – $12,000+ |
| Gelco chimney cap supplied and installed | $180 – $450 |
| Famco venting components, replace damaged section | $200 – $600 |
| Top-sealing damper | $300 – $750 |
| Masonry waterproofing, per chimney | $250 – $650 |
What pushes a liner job toward the top of that range? A flue with offsets or turns, a bigger flue footprint that needs more stainless, a cap that has to be cut out and rebuilt, or a firebox that needs work at the same time. What brings it down? A clean, straight flue on a single-story home where the liner feeds through without cutting or an oversized custom cap. On rebuilds, the single biggest driver is depth: a rebuild that stops above the roofline is a masonry job, but a rebuild that goes below it touches the structure of the house and the price climbs quickly. If a HeatShield resurfacing can restore the flue instead of pulling it, you’ll usually land closer to the $950 end than the full liner range. That’s the whole point of keeping ceramic resurfacer in the material mix.
What Affects Chimney Liner & Rebuild Pricing in Fort Myers
- Flue condition. Hairline cracks, spalling, and separated clay tiles can often be resurfaced. A flue with missing sections, or one that was never lined properly to begin with, needs a new liner. We scan the flue before quoting so the number matches what’s actually there.
- Flue geometry. A straight run of flue feeds a flexible liner easily. Offset flues, flues that shift course partway down, and flues with tight turns need a liner system built for it. This is where DuraFlex flexible liner earns its keep.
- Masonry movement and moisture. Fort Myers heat and seasonal rain hit masonry hard. A chimney that takes on water and then bakes in the sun will crack and spall. Waterproofing after the repair prevents a repeat visit. If the crown is already failing, it needs rebuilding first or the liner work sits on a wet foundation.
- Type of appliance. A wood-burning fireplace, a gas insert, and a furnace flue all have different liner requirements. The appliance decides the liner material and the venting components, including Famco parts when a venting run needs to be replaced.
- Chimney height and roof access. Taller chimneys mean more materials and more time on the roof. Roof pitch, chimney location, and the surrounding structure all affect how accessible the work is.
- Age of the home and prior work. Homes that have had an insert added, a liner patched, or a cap rigged up with hardware-store parts often need some cleanup before proper work can start. Undoing a previous shortcut adds time and materials.
One thing to know: chimney work is not a place to chase the lowest number. A liner that’s undersized for the appliance, or one installed without proper insulation, can fail an inspection later and cost more to redo than it would have cost to do right the first time. Built to last past the next inspection is the standard, not “cheapest bid wins.”
Liner vs. Rebuild: Which Does a Fort Myers Chimney Actually Need?
Most chimneys need a liner, not a rebuild. A rebuild only becomes necessary when the masonry structure itself has failed: broken or missing bricks, a chimney that leans, a crown that’s collapsed, or a flue that’s so damaged no liner can be seated in it. If the masonry is sound and the flue is cracked or deteriorated, resurfacing with HeatShield ceramic flue resurfacer often solves the problem at a fraction of rebuild cost.
Here’s the rough call:
- Liner repair: flue cracks, gaps in clay tile, a flue that’s unlined or has the wrong liner for the appliance. Cost usually stays under $2,600.
- HeatShield resurfacing: the flue is intact enough to be restored rather than lined over. Repairs the surface, not the whole flue. Cost typically $950 to $2,400.
- Partial rebuild: damaged brick and mortar above the roofline, crown failure, or a chimney top that’s separated. Cost $1,900 to $5,200.
- Full rebuild: failed structure below the roofline. Cost $5,500 and up. This is the rare case, and it’s taken seriously for good reason.
We inspect before we quote, and we tell you which category you’re in. If a resurfacing will do, we’ll say so rather than quote a liner you don’t need.
How to Save on Chimney Liner & Rebuild
We can’t shave material costs out of a fair job, but we can tell you where the savings usually live:
- Catch it before it becomes structural. A cracked flue or a failing crown caught early is a repair. Caught late, it’s a rebuild. The inspection fee is minor compared to the difference.
- Resurface when the flue allows it. HeatShield ceramic resurfacer can often restore a deteriorated flue without the demolition a full liner replacement involves. Ask whether resurfacing is an option for your flue.
- Bundle the cap and venting work. If the cap is failing or a venting run needs replacement, having it done alongside the liner means one visit and one trip up the roof, not two.
- Handle the dryer vent while we’re there. Lint accumulation is a fire hazard, and a clogged dryer vent is one of the most common appliance-related fire risks in any home. One call covers your chimney and your dryer vent.
- Get a written estimate before work starts. Ours is free. The written price sets the final cost, with no hidden add-ons after the job begins.
If you’re not sure what your chimney needs, call (844) 834-3136 for a free estimate. We’ll tell you what we see and what it costs before anything gets touched.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Fort Myers?
A typical chimney liner installation in Fort Myers runs $1,450 to $3,800, depending on whether the flue is straight or has offsets. Standard DuraFlex flexible liner jobs land around $1,450 to $2,600, while complex or offset flues run $2,200 to $3,800. Call (844) 834-3136 for an exact quote – estimates are free.
Is it cheaper to resurface a flue or install a new liner?
Resurfacing is usually cheaper, typically $950 to $2,400, compared to $1,450 to $3,800 for a new liner. It only works if the flue structure is sound enough to be restored rather than lined over. An inspection decides which is the right and safe call for your chimney. Call (844) 834-3136 and we’ll give you a clear answer.
How much does a chimney rebuild cost in Fort Myers?
A partial chimney rebuild above the roofline typically runs $1,900 to $5,200 in the Fort Myers market. A full rebuild that goes below the roofline costs $5,500 to $12,000 or more, because it touches the structure of the home. Call (844) 834-3136 for a written estimate.
Can you come today?
Yes, in most cases. We offer same-day service when scheduling allows, with fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. Call (844) 834-3136. We answer 24/7.
Does the liner matter as much as the sweep?
Yes, and often more. The sweep keeps creosote from building up, but the liner controls how the chimney vents. A cracked or undersized liner lets gases and heat escape into the home’s structure, which is a fire risk that no cleaning schedule solves. Call (844) 834-3136 to have your liner inspected.
What to Have Ready Before We Quote
The estimate goes faster when we have a clear picture of the job, so here’s what helps. Have a rough sense of what the chimney is venting (wood fireplace, gas appliance, wood stove). If you’ve had a past inspection report, keep it handy; it can save us a step. If the chimney has any visible damage from the ground, mention it when you call.
For property managers scheduling on behalf of tenants, we know documentation matters for liability and insurance purposes, so a written estimate and a clear scope of work matters as much as the price. We write everything down the same way whether the job is for an owner-occupant or a landlord.
Why the Materials Matter More Than the Line Item
Most homeowners hire on the estimate number alone. Then, three years later, the liner fails an inspection and they’re paying for the job a second time. That’s why the material matters. Flexible liner systems built for the flue they’re going into hold up. A liner that was sized by guesswork won’t. Gelco caps fitted correctly keep water and wildlife out of the chimney year after year. Famco venting components and Copperfield accessories match the setup the appliance actually needs. We buy through Olympia Chimney and Copperfield, the wholesale trade suppliers that certified professionals use.
We’re a full-service chimney specialist for homes in Fort Myers, which means the liner, the cap, the crown repair, the venting, and the dryer vent cleaning all come from one call. No subcontracting required for routine work. Our technicians have up to 9 years of experience, and we clean, repair, and inspect with the same kit on the truck.
When to Get Your Chimney Inspected
A liner doesn’t announce it’s cracked. By the time a homeowner notices smoke backing into the room or a worsening draft, the flue has usually been failing for a while. Pay attention to these signals:
- Smoke coming back down the flue when you light a fire
- A strong, unpleasant smell from the chimney when the fireplace is idle
- Bits of mortar or tile collecting on the smoke shelf or firebox floor
- A chimney cap that’s cracked, bent, missing, or sitting crooked
- White staining on the exterior masonry (a sign of moisture penetration)
- Visible cracks in the firebox or any of the interior flue
Any one of those is enough to justify an inspection. Fire risk from a deteriorated liner doesn’t sit still, and a liner job caught early is a repair; caught late, it can turn into a rebuild. That’s the sober reason we don’t advise waiting.
Chimney liner and rebuild work is not a place for shortcuts. A liner sized by guesswork or a rebuild done with mismatched materials will fail the next inspection, and you’ll pay twice. Built to last past the next inspection – that’s the standard, and that’s what the whole material list exists for.
If you’ve got a chimney that’s never been inspected, is venting oddly, or was last worked on years ago, now’s the time. Call (844) 834-3136 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers your chimney and your dryer vent, and the written estimate sets the price before work begins.
Written by the team at Fort Myers Chimney Sweep.
Pricing reflects the Fort Myers market as of 2026. Fort Myers Chimney Sweep offers free estimates – call (844) 834-3136.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Amanda Barrett"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Darius Whitfield"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Eduardo Flores